Skip to main content
Third Earth Design
  • About
  • Projects
  • Upcoming
  • Contact

Iron Man Illuminated Cut-Out



"The truth is... I am Iron Man."
- Tony Stark, from Iron Man (2008)

This character cut-out is a relatively quick project, it only took a few hours from start to finish and you only need a few tools, as well as an acrylic sheet and the vinyl wall sticker and you’re pretty much good to go. Rather predictably I’ve chosen the Marvel character Iron Man, but you could really apply this to any character of your choosing. Spiderman, The Hulk or Batman would be equally good choices in my opinion.

The Make


The most important part of this project is to select the appropriate vinyl sticker to compliment where you intend to put your cut-out. I choose an image of Iron Man in a flying pose as I intended to hang him from the ceiling. I also added illumination to the cut-out since Iron Man has many elements that light up, such as the hand repulsor, arc reactor and the glowing eyes. This step is optional, but it really brings it to life.

The overall construction is pretty straight forward and you only need a permanent marker to draw the outline and a jig-saw to cut it out. If you’re opting to add some illumination you’ll also need a soldering iron, a hot-melt glue gun and a sharp craft knife to cut out the illuminated areas from the vinyl (this is also optional). I also used different sized hole-saws to cut clear acrylic to make light diffusers for the repulsor, arc reactor and eyes.


Instructables.com

Instructions for this project are available on Instructables.


Photo Gallery


 
 

Related Projects


Hogwarts Halloween Window Display
Hogwart's Halloween Window Display
Frozen Rose RGB LED Light
Multi-Colored Frozen Rose
ARCade Reactor Gaming & Media System
Arcade Reactor powered by RetroPie

Tutorials

Find more projects and tutorials
on my Instructables page.

Social Media

  • Facebook
  • Instagram
  • Twitter
  • Youtube

Contact Me

E-mail: info@thirdearthdesign.com
or use the contact page.

Copyright © Third Earth Design 2026