Skip to main content
Third Earth Design
  • About
  • Projects
  • Upcoming
  • Contact

Sim Rig Handbrake



"I knew he'd brake, he has a wife and two kids at home."
- Fernando Alonso, Racing Driver

This is from a series of projects that creates a hybrid flight / racing rig with haptic feedback.


The Handbrake is 3d printed, it utilises a hall sensor for positional awareness of the lever and it integrates with my Sim Rig Button Box. It is finished with a custom made faux-leather gaiter and red top-stitching. This was the final addition to my Sim Rig and signalled the completion of the project.

The Make


It is based on a design by HaraDaya on Thingiverse. The mechanical elements have been re-designed to use springs, screws, brass inserts, and 3d printed bushings for a smooth, reliable action. The potentiometer has also been replaced by a linear hall sensor, and it neatly integrates with my Sim Rig Button Box via the RJ12 accessories port. It mounts onto a 3d printed arm that is fixed to the side of the chair frame.

Assembly consists of 3d printing the parts, tapping some holes and adding the brass inserts, then everything just screws together. The PCB with hall sensor is fitted inside the base, and the tension spring is attached. The faux-leather gaiter is then glued to the handle with some epoxy and clamped to the gaiter base plate with some screws. Finally the handle with the attached gaiter slides onto the assembly and is fixed to the base.

The following fixings are required:

  • M3 - 08mm - PAN
  • M3 - 12mm - PAN
  • M3 - 10mm - CSK
  • M3 - 20mm - CSK
  • M3 - 30mm - CSK
  • M3 - 60mm - CSK
  • M4 - 12mm - CSK
  • M4 - 25mm - CSK
  • M8 - 35mm - CSK
  • M8 - 150mm - Threaded Rod
  • M8 - Nut
  • Extension Spring - 32mm(L), 8mm (OD)
  • Compression Spring - 35mm(L), 16mm (OD)
  • Magnet (to interact with the hall sensor)
  • M3 - Brass Inserts
  • M4 - Brass Inserts

The Specs


  • Mostly 3d printed
  • Utilises a Hall sensor for axis positioning
  • Custom made PCB
  • RJ12 Connectivity
  • Integrates with my custom Button Box

Photo Gallery


 
 

Related Projects


Create a Custom Joystick with the Teensy 4.1
Creating a custom joystick with the Teensy 4.1
Sim Rig Button Box
Sim Rig Button Box Powered by Teensy
Sim Rig Touchscreen Dashboard
Sim Rig Touchscreen Dashboard

Tutorials

Find more projects and tutorials
on my Instructables page.

Social Media

  • Facebook
  • Instagram
  • Twitter
  • Youtube

Contact Me

E-mail: info@thirdearthdesign.com
or use the contact page.

Copyright © Third Earth Design 2026