Skip to main content
Third Earth Design
  • About
  • Projects
  • Upcoming
  • Contact

NeoPixel Shield for the Arduino Nano



"Happiness can be found, even in the darkest of times, if one only remembers to turn on the light."
- Albus Dumbledore, from J.K. Rowling's Harry Potter and the Prisoner of Azkaban

The NeoPixel Shield is a custom-designed and professionally manufactured PCB that includes an Integrated real-time clock, various I/O headers and support for an external power supply (connected by either a DC jack or a screw terminal block). It's designed to work with the Arduino Nano microcontroller.

Its main purpose is to allow NeoPixel (WS2812 LED) strips to be easily connected and to provide everything that's required for a reliable, convenient, and versatile way of using NeoPixels in Arduino based projects. I'm already using this board in a couple of lighting projects.

The Make


The PCB itself was designed using Autodesk's EAGLE and was professionally manufactured by OSH Park in the USA.

Once you have the board it is just a case of soldering the various through-hole components and a couple of SMD components, which includes a DS3231MZ+ Real-Time-Clock as well as a battery back-up.

The rest of the components are mostly made up of header pins, capacitors and resistors. Full details are available on the Instructable.

The Specs


  • Arduino Nano Compatible
  • External power supply supporting higher current for the NeoPixel strips
  • Support for up to 7.5A current with a 2oz weight copper PCB
  • Can be powered by using a DC jack (2.1mm) or a screw terminal block
  • DS3231 Real-Time-Clock with battery back-up
  • Sensor input header with switchable pull-up / pull-down resistor support
  • 8x Pin digital I/O header breakout (2x pins have optional resistors for use with LEDs)
  • 4x Pin analogue I/O header breakout
  • Optional fuse to protect the Arduino from over-current (by-passable by jumper)
  • Arduino can be powered via the VIN pin or the 5v pin (switchable by jumper)
  • NeoPixel strips connect via screw terminal block with high-current support
  • Built-in 1000µF capacitor and 470Ω resistor for the NeoPixel strips
  • Small form factor - 56.0mm (L) x 42.0mm (W) x 26.0mm (H) with Arduino fitted

Instructables.com

Instructions for this project are available on Instructables.


Photo Gallery


 
 

Related Projects


Touchscreen Display and Battery for the PiKon Telescope
3d Printed Touchscreen Display for the PiKon Telescope
Star Wars: 3d Printed Thermal Detonator
Star Wars 3d Printed Thermal Detonator
Frozen Rose RGB LED Light
Multi-Colored Frozen Rose

Tutorials

Find more projects and tutorials
on my Instructables page.

Social Media

  • Facebook
  • Instagram
  • Twitter
  • Youtube

Contact Me

E-mail: info@thirdearthdesign.com
or use the contact page.

Copyright © Third Earth Design 2026