Skip to main content
Third Earth Design
  • About
  • Projects
  • Upcoming
  • Contact

MOZA Racing SR-P Pedal Inversion



"Sometimes there’s this moment when I’m in the car when everything is peaceful and no one can catch me. In that moment, I’m flying."
- Sonny Hayes, from F1: The Movie

This is from a series of projects that creates a hybrid flight / racing rig with haptic feedback.


For the racing element, I opted for the Moza Racing wheel base and the SR-P pedals, which includes a throttle, a brake with load-cell, and clutch pedals. They come in a typical arcade style floor mounted design, but to add some realism and make them feel more like a typical car, I decided to invert them, resulting in the pedals being suspended from above.

The Make


The mount is designed using CAD and manufactured from a 6mm Aluminium plate that is CNC machined. Everything is then finished in black and assembled using 3030 aluminium extrusion. A slight modification is made to the stock pedals where a 8mm hole is drilled in one end of the pedal plate, this mirrors the factory made hole on the opposite end. These holes are then used to mount the pedals to the extrusion cross-sections. A 3d printed enclosure allows us to re-locate the controller board from the throttle pedal and instead mount it on the extrusion at the rear of the frame using drop-in T-nuts.

Other bells and whistles also get added on, such as a large bass shaker that's mounted to the rear of the pedal plate, and a rumble motor that's mounted to the back of the brake pedal. The whole thing is then assembled on to the rig. Custom made RJ12 cables are used to extend the stock signal cables from each pedal and connect them back to the re-located controller board. RJ12 couplers are used to retain the stock cables without the need to cut or solder anything.

The Specs


  • Moza SR-P Pedals with load-cell
  • Inverted pedals that replicate the look and feel of a real car
  • Adjustable pedal height and angle (2x height and 3x angle positions)
  • Multiple rig mounting points
  • Adjustable horizontal positioning of the pedals
  • Thumb-screw bolts to easily swap between a 2 and 3-pedal set-up
  • Integrated bass shaker mount for haptic feedback
  • Brake pedal rumble motor mount for additional feedback
  • RJ12 connectivity that retains the use of stock cables

Photo Gallery


 
 

Related Projects


Create a Custom Joystick with the Teensy 4.1
Creating a custom joystick with the Teensy 4.1
Sim Rig Touchscreen Dashboard
Sim Rig Touchscreen Dashboard
Sim Rig Button Box
Sim Rig Button Box Powered by Teensy

Tutorials

Find more projects and tutorials
on my Instructables page.

Social Media

  • Facebook
  • Instagram
  • Twitter
  • Youtube

Contact Me

E-mail: info@thirdearthdesign.com
or use the contact page.

Copyright © Third Earth Design 2026